Status as of 3 November 2026: battery passport mandatory from 18 February 2027; the Article 77(9) implementing act on persons with a legitimate interest is still a Commission draft (feedback open until 16 November 2026).
EU battery passport (18 February 2027): A machine-readable, QR-linked data record required by Regulation (EU) 2023/1542 for industrial batteries above 2 kWh, EV batteries, and LMT batteries. Records carbon footprint, recycled content, chemistry, state of health, and supply chain due diligence data, with permission-controlled access throughout the battery’s operational life. The EU DPP Registry went live on 20 July 2026; its implementation arrangements are laid down in Implementing Regulation (EU) 2026/1778, in force since 6 August 2026. The passport ceases to exist once the battery has been recycled (Art. 77(8)).
All other dates of the regulation, from labelling to due diligence, are listed in our EU Battery Regulation deadlines and checklist.
What Is the EU Battery Passport?
The EU battery passport is a digital product passport mandated by EU Regulation 2023/1542 for batteries placed on the European market. It is a structured, machine-readable data record — linked to the physical battery via a QR code — that stores lifecycle data including carbon footprint, recycled content, chemistry, state of health, and supply chain due diligence declarations. LMT batteries, industrial batteries above 2 kWh and electric vehicle batteries must have one from 18 February 2027 (Article 77(1)).
That definition matters because the battery passport is often conflated with the Battery Regulation itself. The regulation is the law — the battery passport is the specific data infrastructure mechanism that law demands. Understanding that distinction from the outset saves compliance teams considerable time when they start mapping obligations against internal systems.
The regulation was adopted on 12 July 2023 and published in the Official Journal of the EU on 28 July 2023. It is directly applicable across all 27 member states without transposition — there is no scope for national governments to soften or delay its requirements. For battery manufacturers, EV producers, and importers placing batteries on the EU market, the deadline of 18 February 2027 is a hard statutory date, not a target or a recommendation.
If you are new to the broader DPP framework, the guide on what is a digital product passport provides a useful baseline before diving into battery-specific rules. The battery passport was the first sector where DPP obligations were written into EU law, and it remains the template against which all subsequent product category rules are being designed.
Legal Basis: EU Regulation 2023/1542
EU Regulation 2023/1542 — the EU Battery Regulation — repeals the older Battery Directive 2006/66/EC and replaces it with a comprehensive framework that addresses the entire battery lifecycle. Where the 2006 Directive focused primarily on hazardous substance restrictions and take-back obligations, the 2023 Regulation introduces requirements that no battery legislation anywhere in the world has previously attempted at scale: mandatory carbon footprint declarations, recycled content thresholds, supply chain due diligence for critical raw materials, and the battery passport.
Article 77 of the Regulation contains the core battery passport obligations. It requires the passport to be accessible through the QR code of Article 13(6), linked to a unique identifier attributed by the economic operator placing the battery on the market (Article 77(3)), and to contain the information listed in Annex XIII; the passport must remain available even after that operator ceases to exist or ceases its activity in the Union (Article 78(e)), and it ceases to exist once the battery has been recycled (Article 77(8)). The Commission is empowered to amend Annex XIII and the identifier standards by delegated acts (Article 77(2) and (3)), and had to specify by implementing act, by 18 August 2026, who counts as a person with a legitimate interest (Article 77(9)).
The battery passport connects to the ESPR regulation through shared architecture. The DPP framework developed under ESPR is the same framework applied to batteries, even though batteries have their own governing regulation. The battery passport must be fully interoperable with other digital product passports (Article 78(a)), and the economic operator must upload the battery's unique identifier to the registry set up under Article 13(1) of the ESPR (Article 77(10)); the identifier and data carrier standards, however, are set separately (see below). A manufacturer who builds battery passport capability is building infrastructure applicable to future DPP obligations across their product range.
Which Batteries Are Covered?
The battery passport does not apply to all batteries simultaneously. The regulation phases requirements by battery category, with the highest-impact categories going first.
Covered From February 18, 2027
Industrial batteries with a capacity greater than 2 kWh and electric vehicle batteries must carry a battery passport from 18 February 2027. This covers the primary commercial targets of the regulation: stationary energy storage systems, grid-connected batteries, batteries used in material handling equipment (forklifts, AGVs), and traction batteries in passenger cars, vans, trucks, and buses.
Light means of transport (LMT) batteries — sealed batteries of 25 kg or less used in e-bikes, electric scooters and other light vehicles (a heavier traction battery for a category L vehicle is an electric vehicle battery, Article 3(1), points (11) and (14)) — are also subject to battery passport requirements, and they are covered by the same 18 February 2027 deadline under Article 77 as industrial and EV batteries. Manufacturers of LMT batteries should treat 2027 as their working planning assumption.
Portable Batteries
Portable batteries — those used in consumer electronics, power tools, and similar products — are subject to the Battery Regulation as a whole, but Article 77(1) does not include them among the categories subject to the battery passport obligation, which lists only LMT batteries, industrial batteries above 2 kWh, and electric vehicle batteries. The Regulation does not set a timeline for extending the passport to portable batteries.
SLI Batteries
Starting, lighting, and ignition batteries — the conventional lead-acid batteries used in internal combustion engine vehicles — are covered by the Battery Regulation, including its hazardous substance restrictions, recycled content rules (Article 8) and take-back, but Article 77(1) does not include SLI batteries among the categories subject to the battery passport obligation, and the Regulation sets no timeline for extending it to this category.
| Battery Category | Definition | Battery Passport Deadline | Identifier Level |
|---|---|---|---|
| EV batteries | Traction batteries for electric road vehicles | 18 February 2027 | Individual unit |
| Industrial batteries >2 kWh | Stationary storage, forklifts, industrial equipment | 18 February 2027 | Individual unit |
| LMT batteries | E-bikes, e-scooters, other light vehicles (battery 25 kg or less) | 18 February 2027 | Individual unit |
| Portable batteries | Consumer electronics, power tools | Not covered by Art. 77(1) | N/A |
| SLI batteries | Start/light/ignition for ICE vehicles | Not covered by Art. 77(1) | N/A |
What Information Must a Battery Passport Contain?
This is where battery passport compliance gets operationally demanding. The regulation defines data categories at a high level; the Commission's data points guidance (see below) details the individual fields. Based on Article 77 and Annex XIII of the regulation, the following data categories are required in a compliant battery passport.
Registry Operational — 20 July 2026: The EU DPP Registry went live on 20 July 2026; its implementation arrangements are laid down in Implementing Regulation (EU) 2026/1778, in force since 6 August 2026. A separate sandbox lets economic operators rehearse enrolment and registration without touching official data. The registry user guide (version 1.03, 16 September 2026) stated that successful registration of battery passports was not yet available because the semantic catalogue for the product group had not yet been defined. On 30 October 2026 the Commission published the battery semantic artefacts (version 1.0.0, with EV, industrial and LMT sub-groups), an API guide and a semantic data guide; whether production registrations now succeed has not been confirmed. Our EU DPP registry preparation checklist details what operators can already do.
Data Points Updated — 19 October 2026: The Digital Batteries Passport – Data Points by Category document was revised on 19 October 2026 (version 3.2, replacing version 2.0 of 15 August 2026); it is guidance, not a binding text. It lists the data points per battery category (EV, LMT and industrial batteries) and marks each as mandatory, optional, applicable only in certain cases, or not to be filled as of February 2027. Compliance teams mapping data gaps should reference this updated version alongside Article 77 and Annex XIII of Regulation (EU) 2023/1542.
User Guide Updated — 16 September 2026 (v1.03): The EU DPP Registry user guide for economic operators was revised again on 16 September 2026, reaching version 1.03. The changes refine the organisation enrolment and verification workflow, including the PDF Declaration download step and its signature or seal validation checks; they do not alter the battery passport data content requirements described above. Review the current version at the official EU DPP Registry before finalising your implementation approach.
Battery Identity and General Information
The passport must record the battery model identifier, batch and serial numbers, manufacturing date and location, and the manufacturer's legal name and address. This section maps to the product identity requirements common across all DPP formats, as outlined in the digital product passport framework.
Battery Chemistry and Technical Specifications
Battery chemistry — lithium iron phosphate, NMC, NCA, lithium-sulfur, sodium-ion, or other formulations — must be declared. Rated capacity (in Ah), minimal, nominal and maximum voltage, original power capability (in watts) and expected lifetime in cycles, with the reference test used, are all required (Annex XIII, point 1). This data enables recyclers to select appropriate processing routes and enables secondary market buyers to assess technical compatibility.
Carbon Footprint Declaration
Carbon footprint data is one of the most demanding requirements in the battery passport (our battery carbon footprint declaration guide covers the method and the dates in detail). The passport carries the carbon footprint information of Article 7(1) and (2) (Annex XIII, point 1(c)), expressed in kilograms of CO2 equivalent per kWh of the total energy provided by the battery over its expected service life (Article 7(1)(d)). The Regulation phases in the stringency of this requirement: first, a declared value; later, a performance class requirement; and eventually, a maximum threshold above which batteries cannot be placed on the market.
Carbon footprint calculations must follow the methodology set out in a delegated act under Article 7(1); the format of the declaration is set by an implementing act. The calculation scope covers raw material acquisition and pre-processing, main product production (cell and battery assembly), distribution, and end of life and recycling (Annex II, point 4). Getting this number right requires supply chain data that most battery manufacturers have not previously collected systematically — upstream carbon data from cathode active material suppliers, cell fabrication energy intensity, and primary versus secondary material inputs.
Recycled Content
From 18 August 2031, industrial batteries above 2 kWh (except those with exclusively external storage), electric vehicle batteries and SLI batteries must meet mandatory minimum recycled content thresholds for cobalt, lithium, nickel and lead. Before that date, from 18 August 2028 or 24 months after the delegated act on the calculation methodology if that is later, those batteries must be accompanied by documentation stating the recycled share of each of these materials. The declared values feed directly into the battery passport and are subject to third-party verification under the regulation's conformity assessment framework.
The thresholds that will apply from 18 August 2031 under Article 8: cobalt 16%, lead 85%, lithium 6%, nickel 6%. A second, more demanding tier applies from 18 August 2036: cobalt 26%, lead 85%, lithium 12%, nickel 15%. Manufacturers designing battery chemistries and sourcing strategies today need to build toward these thresholds. The battery passport is the verification mechanism that proves compliance. The recycled content guide covers the documentation and the calculation method.
Supply Chain Due Diligence
Article 48(1) of the regulation, as amended by Regulation (EU) 2025/1561, requires economic operators placing batteries on the market or putting them into service to set up and implement a battery due diligence policy for cobalt, natural graphite, lithium and nickel (Annex X, point 1) from 18 August 2027; the original date was 18 August 2025. From the same date, Article 52 requires disclosure: the verification report, approval decision and audit reports to authorities on request, relevant information to immediate downstream purchasers, and an annual public report on the policy. The battery passport must contain or reference the due diligence report that documents sourcing practices, conflict mineral checks, and risk management measures aligned with the OECD Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas (Annex X, point 4).
Article 47 exempts economic operators with a net turnover below EUR 40 million in the financial year preceding the last financial year from this due diligence chapter, unless they belong to a group of parent and subsidiary undertakings that exceeds that threshold on a consolidated basis.
For operators above the threshold, this requirement puts battery manufacturers in the same compliance space as the EU Corporate Sustainability Due Diligence Directive (CS3D). Companies that have not yet invested in supply chain mapping and supplier auditing for these materials will find the battery due diligence requirement is one of their most time-intensive compliance obligations.
State of Health and Remaining Capacity
For EV batteries, LMT batteries and stationary battery energy storage systems, the battery passport must carry updatable state-of-health (SoH) information (Annex XIII, point 4(b), with Article 14(1)). This is the field that makes the battery passport genuinely dynamic rather than a one-time compliance document. SoH data — typically expressed as a percentage of original capacity at defined discharge conditions — must be kept up to date (Articles 14(1) and 77(4)).
The purpose is to enable the secondary battery market. A battery removed from an EV at end-of-vehicle-life may still have 70-80% of its original capacity, making it viable for stationary storage. Without verifiable SoH data embedded in the passport, secondary market buyers price in uncertainty — depressing values and reducing the economic case for second-life applications. The battery passport resolves this information asymmetry.
End-of-Life and Dismantling Information
Dismantling information (exploded diagrams of the pack showing where the cells are, disassembly sequences, type and number of fastenings, tools required, warnings on risks of damaging parts, cell count and layout), detailed composition, part numbers and sources for spare parts, and safety measures are listed in Annex XIII, point 2. They are not public: they are reserved for persons with a legitimate interest and the Commission, and also open to notified bodies and market surveillance authorities (Article 77(2)). The four access levels are set out below.
| Data Category | Required From | Verification Required |
|---|---|---|
| Battery identity and technical specs | 18 February 2027 | Self-declaration |
| Carbon footprint — declared value (Art. 7(1)) | 18 Feb 2025 (EV) · 18 Feb 2026 (industrial, non-external storage) · 18 Aug 2028 (LMT) · 18 Aug 2030 (industrial, external storage) — or later if the delegated/implementing act is adopted later | Third-party |
| Carbon footprint — performance class (Art. 7(2)) | 18 Aug 2026 (EV) · 18 Aug 2027 (industrial, non-external storage) · 18 Feb 2030 (LMT) · 18 Feb 2032 (industrial, external storage) — or later if the delegated/implementing act is adopted later | Third-party |
| Carbon footprint — maximum threshold (Art. 7(3)) | 18 Feb 2028 (EV) · 18 Feb 2029 (industrial, non-external storage) · 18 Aug 2031 (LMT) · 18 Aug 2033 (industrial, external storage) — or later if the delegated act is adopted later | Third-party |
| Recycled content — declaration (Art. 8(1)) | 18 August 2028, or later if the delegated act is adopted later (18 August 2033 for LMT) | Third-party |
| Recycled content — mandatory thresholds | 18 August 2031 (Co, Li, Ni, Pb; LMT excluded) · 18 August 2036 (higher tier, LMT included) | Third-party |
| Supply chain due diligence (Art. 48(1), as amended by Regulation (EU) 2025/1561) | 18 August 2027 | Third-party audit |
| State of health (EV and LMT batteries, stationary storage) | 18 February 2027 | BMS data, updatable |
| End-of-life / dismantling data | 18 February 2027 | Operator-access controlled |
Who Can See What: The Four Access Levels of Annex XIII
A battery passport is not one block of data visible to everyone. Annex XIII has four points, and Article 77(2) gives each its own audience. Getting this split right is the core design decision of any battery passport system, because a field published at the wrong level is either a compliance gap or a leak of confidential design data.
| Annex XIII part | What it contains | Who can access it |
|---|---|---|
| Point 1: battery model, public | Label information of Annex VI Part A, material composition and chemistry, hazardous substances other than mercury, cadmium or lead, critical raw materials, carbon footprint, responsible sourcing, recycled and renewable content, rated capacity, voltages, power capability, expected lifetime in cycles, temperature range, warranty period, round trip efficiency, internal resistance, c-rate, markings, EU declaration of conformity, waste prevention information | The public, free of charge (Article 78(b)) |
| Point 2: battery model, restricted | Detailed composition (cathode, anode, electrolyte), part numbers and contact details of sources for spare parts, dismantling information (exploded diagrams, disassembly sequences, fastenings, tools, warnings, cell count and layout), safety measures | Persons with a legitimate interest and the Commission; also notified bodies and market surveillance authorities |
| Point 3: compliance evidence | Results of test reports proving compliance with the Regulation and its delegated or implementing acts | Notified bodies, market surveillance authorities and the Commission |
| Point 4: individual battery | Performance and durability values of Article 10(1) at placing on the market and at each change of status, state of health under Article 14, status (original, repurposed, re-used, remanufactured or waste), usage data such as charge and discharge cycles, negative events like accidents, temperature and state of charge | Persons with a legitimate interest |
Two consequences follow. First, points 1 to 3 describe the battery model, while point 4 describes one physical battery: this is why the Regulation speaks of "each" LMT, electric vehicle and industrial battery having a passport (Article 77(1)), and why every unit needs its own identifier. Second, the definition of a "person with a legitimate interest" is left to an implementing act that the Commission had to adopt by 18 August 2026 (Article 77(9)). As of 3 November 2026 it has not been adopted: a Commission draft was opened for feedback on 19 October 2026, with feedback accepted until 16 November 2026 and adoption planned for the fourth quarter of 2026. In our view, until it is published, a passport system should keep points 2 and 4 behind an access control that the manufacturer can open case by case, rather than behind a fixed list of authorised roles.
In DPP-Tool, the restricted parts are released through signed links issued by the manufacturer, valid 90 days by default, revocable at any time and logged; the machine-readable record only holds a cryptographic commitment of the restricted data. That is our design choice while the implementing act is pending, not a mechanism the Regulation prescribes. The battery passport software page describes it in detail.
Battery Passport Example: What a Live Record Looks Like
Descriptions of Annex XIII only go so far; it is easier to judge your own data gaps against a real page. We publish a live example battery passport for a 36 V, 17.5 Ah e-bike battery (an LMT battery). The manufacturer, VeloCell Example GmbH, is fictitious and the values are illustrative, but the structure is the one a real passport has to follow:
- Every field of the public battery passport section carries its legal reference, for example "Annex XIII 1(g); Annex VI A(6)" next to the rated capacity, so a reader can check each value against the Regulation.
- Nothing is filled with guesses. Fields whose legal basis does not apply yet are left out, which is our reading of "to the extent applicable" in Article 77(2) rather than a rule spelled out by the Commission: the carbon footprint (point 1(c)) waits for the delegated act on the calculation method, responsible sourcing (point 1(d)) for the due diligence obligations that apply from 18 August 2027 (Article 48(1)), recycled content (point 1(e)) for documentation that LMT batteries need only from 18 August 2033 (Article 8(1)). What the manufacturer has not declared is stated as such: the example shows its EU declaration of conformity as "not declared".
- Restricted parts are not shown (points 2 and 3 on the model passport, point 4 on the individual battery passport): the page states who holds them and how access is granted, and each restricted block is sealed by a cryptographic commitment in the machine-readable record, so its integrity can be checked without disclosing it.
- Each physical battery has its own passport. The passport of battery VC36-2026-000001 adds an individual battery block (serial number, its own passport ID, link to the model passport) on top of the model data.
Our digital product passport examples compare this battery record with textile and electronics passports.
How the Battery Passport Works: Technical Implementation
The battery passport is not a PDF document or a web page. It is a structured data record accessible via a machine-readable data carrier and a standards-compliant backend registry. The technical implementation draws from the same architecture being developed for all EU digital product passports under the ESPR framework.
The Data Carrier
A QR code must be affixed to the battery itself, or where this is not physically possible due to the battery's size or configuration, to its packaging and accompanying documentation. The QR code encodes a URL that resolves to the battery passport record (see our guide to DPP QR codes for error correction and placement). The regulation requires the labels and the QR code to be printed or engraved visibly, legibly and indelibly (Article 13(7)), so lamination, protective coating, and placement decisions must account for exposure to heat, chemicals, and mechanical stress over a multi-decade service life.
One possible technical approach uses the GS1 Digital Link standard, which allows a single QR code to resolve to different data endpoints depending on who is scanning and what access permissions they hold. A consumer scanning the QR code on an EV battery might see carbon footprint and recycled content data. A recycling facility scanning the same code accesses disassembly instructions and hazardous component data. A market surveillance authority accesses the complete conformity record. Same physical carrier, permission-controlled data access.
The Unique Identifier
For LMT batteries, EV batteries and industrial batteries above 2 kWh, identifiers are assigned at the individual battery unit level — not at the model or batch level. This is operationally significant. A manufacturer producing 50,000 battery packs per year must generate 50,000 unique identifiers, link each to its corresponding passport record, and maintain that linkage through the battery's entire operational life, which may be 15-25 years. The QR code and the unique identifier must comply with the ISO/IEC 15459 series, parts 1 to 6, or their equivalent (Article 77(3)). How to structure such identifiers is covered in our DPP unique identifier guide.
The Backend Registry
Article 78 sets the essential requirements for the passport's technical design: full interoperability with other digital product passports; free access according to each actor's access rights; storage by the responsible economic operator or by operators authorised to act on its behalf, who may not sell or re-use the data beyond the service; availability even after that operator ceases to exist or ceases its activity in the Union; restricted rights to modify the information; data authentication, reliability and integrity; and a high level of security and privacy. The passport ceases to exist once the battery has been recycled (Article 77(8)). The Regulation does not prescribe where the data is hosted or a version-history format; keeping one is a practical way to show that the information is accurate, complete and up to date (Article 77(4)).
Building a compliant registry from scratch is a substantial engineering investment. Purpose-built platforms that provide hosted passport infrastructure that can serve the different access levels set out in Annex XIII are the practical route for most manufacturers and importers. The DPP generation tool at DPP-Tool covers this layer with API access, identifier management and a passport version history (the version history is our design choice, not a requirement of the Regulation). For batteries, our battery passport software covers the Annex XIII fields, the four access levels and one passport per serial number.
Interoperability
A critical but often overlooked requirement is interoperability. The regulation anticipates that battery passports will be exchanged across supply chains — between cell manufacturers, battery pack assemblers, vehicle OEMs, fleet operators, second-life buyers, and recyclers. The data formats and API standards must allow these actors to exchange data without proprietary lock-in. Article 77(5) already requires the information to be based on open standards, in an interoperable format, transferable through an open interoperable data exchange network without vendor lock-in.
Battery Passport vs Battery Regulation: Understanding the Distinction
The Battery Regulation (EU) 2023/1542 is the overarching law. The battery passport is one — albeit the most technically complex — of several instruments it deploys. Conflating the two leads to scope misunderstandings that create compliance gaps.
The Battery Regulation covers the full lifecycle with obligations that include: hazardous substance restrictions (Article 6), battery performance and durability requirements (Article 10), safety requirements (Article 12), the battery passport (Article 77), battery labelling (Article 13), carbon footprint declarations (Article 7), recycled content declarations and thresholds (Article 8), supply chain due diligence policies (Article 48), extended producer responsibility (Articles 56 to 58), and the collection, treatment and recycling of waste batteries (Articles 59 to 76).
A manufacturer who implements the battery passport but neglects to establish an EPR compliance scheme, or who meets the carbon footprint declaration deadline but fails to engage a notified body for conformity assessment, is not compliant with the Battery Regulation even if their passport infrastructure is technically perfect. Compliance programs must address all pillars of the regulation, not just the passport obligation.
Who Needs a Battery Passport?
Battery Manufacturers
The obligation to attribute the unique identifier and keep the passport information accurate, complete and up to date falls on the economic operator placing the battery on the market (Article 77(3) and (4)). For a battery made in the EU, that is normally the manufacturer: the person who manufactures the battery, or has it designed or manufactured, and markets it under its own name or trademark. For a battery from a third country, it is the EU-established importer that places it on the market. An importer is treated as a manufacturer for all purposes only where Article 44 applies: own name or trademark, a modification that could affect compliance, or a change of purpose.
Battery cell manufacturers supplying cells to pack assemblers face a practical question the regulation does not fully resolve at the cell level: the battery passport obligation technically attaches to the complete battery product placed on the market, but pack assemblers need cell-level data to populate the passport accurately. This requires upstream data sharing agreements between cell producers and pack assemblers that most have not previously formalised.
Electric Vehicle Producers
EV manufacturers — whether they produce their own battery packs or source them from tier-one suppliers — must ensure that batteries placed on the EU market as part of their vehicles carry compliant passports. Where the OEM sources batteries from a supplier who holds the manufacturer role under the Battery Regulation, the OEM must contractually confirm supplier compliance. Where the OEM itself is the economic operator placing the battery on the market, the OEM directly bears the passport obligation.
The vehicle-battery passport intersection creates a specific complexity: the EV battery passport must be accessible independent of the vehicle — via QR code on the physical battery — so that it can be read by recyclers and second-life operators who may acquire the battery years after the vehicle is deregistered. OEMs integrating batteries from their own production or from vertically integrated supply chains need to ensure the passport survives the vehicle lifecycle.
Importers and Distributors
A business importing batteries into the EU places them on the market, and is therefore itself the economic operator responsible for the passport under Article 77(4). Importers need to audit supplier readiness for battery passport compliance, not as a procurement nicety but as a hard legal prerequisite for continuing to source from their current supply base after February 2027. Before making a battery available, distributors must verify, among other things, that it is marked and labelled in accordance with Article 13, which includes the QR code giving access to the passport (Article 42(2) and Article 13(6)).
Fleet Operators and Second-Life Actors
Fleet operators who purchase EV batteries at scale and second-life battery operators who acquire batteries from end-of-first-life applications benefit from the battery passport as data consumers. The state-of-health data in the passport enables informed purchasing decisions and eliminates the costly testing programs currently needed to assess secondary battery quality. Where they prepare a battery for re-use or repurposing, or repurpose or remanufacture it, and then place it on the market or put it into service, the passport obligations transfer to them and the battery needs a new passport linked to the original one (Article 77(7)).
Used Electric Vehicles, Second-Life and Repurposed Batteries
Searches for the battery passport and the used car market point to a real question: what will a buyer of a second-hand electric vehicle be able to check in 2027? The answer depends on when the battery was first placed on the market.
Batteries already on the road before 18 February 2027
"Placing on the market" means the first making available of a battery on the Union market (Article 3(1), point (16)). The Regulation contains no transitional or retroactive provision requiring a passport for batteries placed on the market before 18 February 2027, and an ordinary resale within the EU does not create a new passport. Our reading, consistent with the Commission's guidance on placing on the market, is therefore that most electric vehicles sold second-hand in 2027 will have no battery passport at all; the share with a passport will grow as vehicles placed on the market from 2027 reach the used market.
Two situations are different:
- Used vehicles or batteries imported from outside the EU: according to the Commission's Blue Guide, used vehicles or batteries that enter the Union market for the first time from a third country are placed on the market at that moment, so a battery imported from 18 February 2027 falls under Article 77(1) even if it is not new.
- Batteries that are prepared for re-use, prepared for repurposing, repurposed or remanufactured and then placed on the market or put into service need a new battery passport linked to the passport or passports of the original battery or batteries (Article 77(7)), even if the original battery predates 2027.
State of health for second-hand buyers
The battery passport is not the only source of health data. Since 18 August 2024, the battery management system of stationary battery energy storage systems, LMT batteries and electric vehicle batteries must contain up-to-date data on state of health and expected lifetime (Article 14(1)). Read-only access to that data must be given, on a non-discriminatory basis, to the natural or legal person who has legally purchased the battery, including independent operators or waste management operators, or any third party acting on their behalf, for three purposes only: making the battery available to independent aggregators or energy market participants, evaluating its residual value or remaining lifetime, and facilitating preparation for re-use, preparation for repurposing, repurposing or remanufacturing (Article 14(2)). For electric vehicle batteries the state of health parameter is the state of certified energy, or SOCE (Annex VII, Part A).
Inside the passport, state of health, battery status (original, repurposed, re-used, remanufactured or waste) and usage data belong to Annex XIII, point 4, which is reserved for persons with a legitimate interest (see the access levels above). For a used-vehicle buyer, BMS access under Article 14 is the immediate route; the passport adds a record for each individual battery placed on the market from 18 February 2027, whose point 4 will be accessible as specified by the Article 77(9) implementing act.
Second-life and remanufacturing operators
An operator that carries out preparation for re-use, preparation for repurposing, repurposing or remanufacturing, and then places the battery on the market or puts it into service, is considered to be the manufacturer for the purposes of the Regulation (Article 38(11)). It takes over the passport obligations and issues the new linked passport (Article 77(7)). A battery passport ceases to exist after the battery has been recycled (Article 77(8)).
Battery Passport and the ESPR Framework
Batteries have their own governing regulation, but the battery passport is designed as an instance of the broader EU Digital Product Passport concept defined under the ESPR regulation. The architecture — unique identifier, data carrier, access-controlled registry, actor-differentiated data layers — is shared. The data fields are battery-specific.
On 15 July 2026, Commission Implementing Decision (EU) 2026/1736 published the references of six harmonised standards (EN 18216:2026 and EN 18219:2026 to EN 18223:2026, covering data exchange protocols, unique identifiers, data carriers, data storage and persistence, APIs, and system interoperability) that give a presumption of conformity with Articles 10 and 11 of the ESPR regulation. That decision is adopted in support of Regulation (EU) 2024/1781 only — it does not apply to the battery passport. The battery passport's own technical reference points remain those set directly in the Battery Regulation: Article 77(3) requires the QR code and unique identifier to comply with the ISO/IEC 15459 series (parts 1 to 6), and recital 44 points to ISO/IEC 18004:2015 for the QR code itself. Manufacturers building shared DPP infrastructure across battery and non-battery product lines should track these as two separate standard sets, not one.
This architectural alignment is intentional: the battery passport must be fully interoperable with other digital product passports (Article 78(a)). Building product-specific DPP infrastructure for every regulated product category would generate fragmentation and create interoperability nightmares across supply chains where the same company is producing batteries, electronics, and components for multiple DPP-regulated product categories simultaneously. By standardising the infrastructure layer and varying only the data schema, the regulation allows a single platform investment to serve multiple compliance obligations.
For manufacturers with product portfolios spanning batteries and other product groups due to be covered by future ESPR delegated acts, such as textiles, building DPP capability for battery compliance in 2025-2026 positions them well for subsequent category obligations. The DPP requirements checklist maps the common infrastructure elements applicable across product categories alongside battery-specific requirements.
How to Prepare for Battery Passport Compliance
February 2027 is now less than four months away, which is little time for manufacturers who still need to build carbon footprint calculation methodologies, engage notified bodies for third-party verification, restructure supplier contracts for data access, and procure or build registry infrastructure. Projects of this scope can take more than a year from initial scoping.
Battery manufacturers can benchmark their current readiness against the six steps below, from scoping the portfolio through to ongoing data management, against the February 18, 2027 deadline.
Step 1: Scope Your Battery Portfolio Against the Regulation
Determine which battery categories in your portfolio are in scope for the February 2027 deadline. Industrial batteries above 2 kWh, EV batteries, and LMT batteries are all confirmed in scope under Article 77(1). Portable batteries and SLI batteries fall outside that scope, with no timeline set for extension. Document the scope decision with reference to Article 3 definitions in the regulation, so the analysis is defensible in a market surveillance audit.
Step 2: Map Your Data Gaps
Inventory the battery passport data categories against your current data holdings. The EC guidance document Digital Batteries Passport – Data Points by Category (version 3.2, 19 October 2026) now provides the most detailed Commission guidance on the data points per battery type — use it as your primary checklist alongside Article 77 and Annex XIII. The EU DPP Registry went live on 20 July 2026 (implementation arrangements: Implementing Regulation 2026/1778), and a sandbox lets manufacturers rehearse enrolment and registration ahead of the February 2027 deadline (the battery semantic artefacts, version 1.0.0, were published on 30 October 2026). The EU DPP Registry user guide for economic operators was updated again on 16 September 2026 (version 1.03), refining the enrolment and organisation verification steps; review the current version before finalising your compliance timeline. Carbon footprint data is almost always the largest gap — most manufacturers hold energy and material consumption data in forms that require significant transformation before they can generate lifecycle carbon figures conformant with the methodology delegated act (Article 7(1)). Supply chain due diligence data for cobalt, lithium, nickel, and graphite is the second most common gap, requiring supplier engagement that can take many months for complex supply chains. State-of-health data for EV batteries may require battery management system upgrades to expose the parameters in the format the passport requires.
Step 3: Engage Your Supply Chain Early
Carbon footprint calculations and recycled content declarations require upstream supplier data. Cell manufacturers need cathode active material supplier data. Pack assemblers need cell manufacturer data. The data chain is long, and each link has its own preparation timeline. Supplier engagement for battery passport compliance needs to begin now, not when the exact data formats are settled, because by then there will be insufficient time to complete supplier audits and data collection.
Step 4: Select Your Registry and Identifier Infrastructure
Decide whether you will build a proprietary registry, use a sector registry, or adopt a commercial DPP platform. For most mid-market manufacturers, a commercial platform is the fastest and lowest-risk route to compliant infrastructure. The how to create a DPP guide covers the implementation decision framework in detail. When evaluating platforms, check for EU data residency, API standards alignment, version history capabilities, and the access permission layer required by the regulation. Comparing options across the market is worthwhile — the DPP software comparison covers the leading platforms and their technical capabilities.
Step 5: Procure Third-Party Verification
Carbon footprint declarations, recycled content declarations, and supply chain due diligence all require third-party verification under the Battery Regulation. Notified bodies and approved verification bodies for battery regulation purposes need to be identified and contracted. Verification capacity in Europe for battery-specific requirements may be limited relative to the volume of batteries that will need certification by 2027. Early procurement of a verification partner is advisable — particularly for manufacturers with complex supply chains or novel battery chemistries.
Step 6: Plan for Ongoing Data Management
The battery passport is not a one-time compliance filing. State-of-health data must be updated throughout the battery's operational life. Regulatory amendments may add data fields. Conformity assessment results must be logged. Build your battery passport program around ongoing data operations rather than a point-in-time certification exercise. The infrastructure investment is only worthwhile if the data in the passport remains accurate and current.
The DPP plans available at DPP-Tool are designed around this operational model — passport hosting, data versioning, API access and lifecycle management rather than a one-shot document generation service.
Battery Passport Compliance Checklist for 18 February 2027
The obligations below apply to each LMT battery, each electric vehicle battery and each industrial battery above 2 kWh placed on the market or put into service from 18 February 2027. Each line names the provision to check it against.
- Scope confirmed per product: battery category under the Article 3 definitions; for industrial batteries, capacity above 2 kWh (Article 77(1)). The 2 kWh threshold applies to industrial batteries only: every LMT and every EV battery needs a passport whatever its capacity.
- Responsible operator identified: the economic operator placing the battery on the market, who may authorise another operator in writing to act on its behalf (Article 77(4)).
- Unique identifier per battery, compliant with the ISO/IEC 15459 series or equivalent (Article 77(3)), and uploaded to the registry set up under Article 13(1) ESPR (Article 77(10)).
- QR code printed or engraved on the battery, or on its packaging and accompanying documents where that is not possible, giving access to the passport (Article 13(6) and (7)). From the same date, every battery, including portable and SLI batteries, must carry a QR code, even though only the three categories above need a passport.
- Annex XIII point 1 complete and public, to the extent applicable to the battery category (Article 77(2)); in our view, fields whose legal basis does not yet apply should be handled explicitly.
- Points 2, 3 and 4 restricted to their audiences (Article 77(2) and Article 78(f)), with an access process ready for persons with a legitimate interest.
- State of health kept up to date for EV, LMT and stationary storage batteries (Article 14 and Annex XIII, point 4).
- Data accurate, complete and up to date (Article 77(4)), with restricted rights to modify it and protection of its authenticity and integrity (Article 78(f) and (g)).
- Availability guaranteed, including after the operator ceases to exist or ceases its activity in the Union (Article 78(e)), and access free of charge (Article 78(b)).
- Open, interoperable format without vendor lock-in (Article 77(5) and Article 78(a)).
- Procedure for changes of status: a new passport linked to the passport or passports of the original battery or batteries when the battery undergoes preparation for re-use, preparation for repurposing, repurposing or remanufacturing (Article 77(7)).
The passport is only one of the Regulation's obligations: labelling, conformity assessment, extended producer responsibility and due diligence have their own dates, listed in our EU Battery Regulation deadlines and checklist.
Common Misconceptions About the Battery Passport
Three misconceptions come up consistently when talking to manufacturers early in their battery passport programs.
The first is that the battery passport is just a QR code. The QR code is the access point; the passport is the complete data infrastructure behind it. A QR code linking to a static product web page does not satisfy the regulation. The regulation requires a machine-readable, standards-compliant, access-controlled record — not a landing page.
The second misconception is that the battery passport is only relevant for batteries sold directly to consumers. The obligation applies to industrial batteries above 2 kWh regardless of whether they are sold B2C or B2B. A stationary energy storage system sold to a commercial building owner needs a battery passport in the same way an EV battery sold in a vehicle does. The consumer-facing design of the QR code serves end-of-life actors and market surveillance authorities as much as it serves direct buyers.
The third misconception is that importers can rely on their non-EU suppliers to handle compliance without contractual structure. EU-based importers who source batteries from non-EU manufacturers are themselves the operator responsible for the passport (Article 77(4)), whether or not they have verified and contractually secured compliance upstream. That exposure includes market withdrawal, product recall, and financial penalties — and it attaches to the importer even if the non-compliance originated entirely outside their organisation.
The textile product passport guide illustrates how similar misconceptions have played out in that adjacent sector, offering useful parallels for compliance teams building cross-category DPP programs.
Frequently Asked Questions
What is an EU battery passport?
The EU battery passport is a digital product passport mandated by EU Regulation 2023/1542 for batteries placed on the European market. It is a structured, machine-readable data record linked to the physical battery via a QR code. The passport stores lifecycle data including carbon footprint, recycled content percentages, battery chemistry, state of health, supply chain due diligence declarations, and end-of-life instructions. It is accessible to different actor types — consumers, operators, recyclers, and regulators — via permission-controlled data layers from a compliant backend registry.
When is the battery passport mandatory?
The battery passport is mandatory from 18 February 2027 for industrial batteries with a capacity above 2 kWh, for electric vehicle (EV) batteries, and for light means of transport (LMT) batteries, all under Article 77(1). Portable batteries and SLI (starting, lighting, ignition) batteries are not covered by the battery passport obligation, and the Regulation sets no timeline for extending it to these categories. The February 2027 deadline is a hard statutory date under EU Regulation 2023/1542, directly applicable across all 27 EU member states without national transposition.
What information must a battery passport contain?
A battery passport must contain: battery identity and technical specifications (chemistry, rated capacity, voltage, cycle life); a carbon footprint declaration in kg CO2 equivalent per kWh; recycled content declarations for cobalt, lithium, nickel, and lead; supply chain due diligence information for critical raw materials; state-of-health data (for EV and LMT batteries and stationary storage, updatable throughout operational life); manufacturer information and conformity declarations; and end-of-life and dismantling information. The European Commission published guidance on exact data fields per battery category (EV, LMT, industrial) on its Digital Product Passport website (data points document, version 3.2 of 19 October 2026), with the EU DPP Registry itself going live on 20 July 2026 (implementation arrangements: Implementing Regulation (EU) 2026/1778), and the DPP Registry user guide for economic operators updated most recently on 16 September 2026 (version 1.03).
Who needs a battery passport?
The obligation to create and maintain a battery passport falls on the economic operator placing the battery on the EU market (Article 77(4)), normally the manufacturer for batteries made in the EU. If the battery comes from outside the EU, the EU-based importer, as the operator placing it on the market, bears the obligation; it may give written authorisation to another operator to act on its behalf. EV producers must ensure batteries in their vehicles carry compliant passports. Distributors must verify that the battery is marked and labelled in accordance with Article 13, including the QR code (Article 42(2)). Operators that repurpose or remanufacture a battery and place it on the market take over the passport obligations, with a new passport linked to the original (Article 77(7)).
How does the battery passport work technically?
The battery passport works through three components: a unique identifier assigned at the individual battery unit level, a QR code (Article 13(6)) printed or engraved on the battery or, where that is not possible, affixed to its packaging and accompanying documents, and a backend registry storing the passport data in a machine-readable, access-controlled format. When the QR code is scanned, the identifier resolves against the registry and returns the appropriate data layer for the scanning actor — consumer-level data for end users, technical data for repair and recycling operators, full conformity records for market surveillance authorities. The passport must remain available even after the responsible operator ceases to exist or ceases its activity in the Union (Article 78(e)).
Is the battery passport the same as the EU Battery Regulation?
No. The EU Battery Regulation (EU) 2023/1542 is the overarching legislation covering the full battery lifecycle — hazardous substance restrictions, performance requirements, conformity assessment, carbon footprint obligations, recycled content thresholds, supply chain due diligence, extended producer responsibility, and collection and take-back schemes. The battery passport is one specific instrument within that regulation, mandated under Article 77. Compliance with the battery passport alone does not constitute compliance with the Battery Regulation; all other obligations under the regulation must also be met.
Who can access the data in a battery passport?
It depends on the part of Annex XIII. Point 1 (model data such as chemistry, capacity, voltages, expected lifetime and the EU declaration of conformity) is public and free of charge. Point 2 (detailed composition, spare parts, dismantling information and safety measures) is reserved for persons with a legitimate interest and the Commission, and is also open to notified bodies and market surveillance authorities. Point 3 (test report results) is reserved for notified bodies, market surveillance authorities and the Commission. Point 4 (data on the individual battery, including state of health and status) is reserved for persons with a legitimate interest (Article 77(2)). Who counts as a person with a legitimate interest will be set by an implementing act under Article 77(9), still a Commission draft on 3 November 2026.
Do used electric vehicles need a battery passport?
Not as a rule. The obligation applies to batteries placed on the market or put into service from 18 February 2027, placing on the market meaning the first making available on the Union market (Article 3(1), point (16)). The Regulation has no retroactive provision, and an ordinary resale within the EU does not create a new passport. A passport is needed when a used vehicle or battery enters the Union market for the first time from a third country from 18 February 2027 (Commission's Blue Guide), and a new linked passport is needed when a battery undergoes preparation for re-use, preparation for repurposing, repurposing or remanufacturing and is placed on the market again (Article 77(7)). Buyers of EV, LMT and stationary storage batteries can already obtain read-only access to state of health data in the battery management system, for the purposes listed in Article 14(2).
Is there an example of a battery passport?
Yes. DPP-Tool publishes a live example for a 36 V, 17.5 Ah e-bike battery (an LMT battery) from a fictitious manufacturer: model passport and passport of one serial-numbered battery. Each field of the public passport section shows its legal reference (Annex XIII, Annex VI or the Article concerned); restricted parts are not displayed but sealed by a cryptographic commitment in the machine-readable record.
What are the penalties for non-compliance with the battery passport requirement?
Member States set the penalties, which must be effective, proportionate and dissuasive, and had to lay down their rules by 18 August 2025 (Article 93). Market surveillance authorities can also prohibit non-compliant batteries from being made available, order their withdrawal and require recalls. In Germany, for example, the Batterierecht-Durchführungsgesetz (BattDG of 30 September 2025, BGBl. 2025 I Nr. 233, as amended by BGBl. 2025 I Nr. 286) punishes a failure to ensure that the passport information is accurate, complete and up to date (Article 77(4), first sentence) with a fine of up to EUR 10,000 (§ 60(2) no. 29 and (3)); the QR code marking of Article 13(6) is covered by the same ceiling (§ 60(2) no. 6). Customers may also require battery passport readiness from suppliers as a procurement condition.